Welfare Hire: Explained

Our Welfare Units are extremely popular and are often hired within the construction sector to enable workers to have an warm area with general facilities to eat and drink, alongside additional sanitation options. In order to comply with The Construction (Design and Management) Regulations 2015 (CDM 2015) work areas must see that certain rules are kept.

  • ‍Clean and working toilets
  • ‍Washbasins with hot and cold running water
  • ‍Sinks large enough to wash face, hands and forearms
  • Somewhere to change, dry and store clothing
  • A rest area to sit, make hot drinks and eat food

Our JOBEC Welfare Units are fitted with the following:

  • Large sink with hot water handwash/unit and clean drinking water
  • Recirculating toilet (30 gallons)
  • Recirculating flush toilet compartment
  • Built-in generator
  • Block insulation & heavy duty floor covering
  • Six way consumer unit
  • Microwave cooker & Kettle
  • Steel personnel doors with sliding steel shutter
  • LED interior lighting with electric wall mounted heater with double sockets

Here is our video below that showcases our JOBEC Welfare Units that we provide to many companies around the UK to ensure they are following correct procedure.

Call us on 01922 649 961 today for any questions you may have regarding the rental of our Welfare Cabins or you can speak to us via our contact form here.

Advertisements

A world full of possibilities.

We can supply many different rotationally moulded or vacuum formed plastic products, A one stop shop that includes Tooling, mold-making service for the home, garden, OEM components and engineered products. Materials we commonly use include ABS and Polyethylene including LDPE, LLDPE, HDPE and cross-linked polyethylene) . We can supply on a bespoke basis, a wide variety of plastic products.

Previous & existing customer products include: Garden pond, pots & containers, Cases, for the materials handling industries, Consumer Goods, Barrels, Tanks, Containers, Cabinets, Trays and Totes boxes, Automotive components, Playground parts, Domestic furniture, Toys, Floats, Barriers, posts and barricades, Storage equipment etc.

Rotational moulding has opened up a whole new way of thinking in the plastic industry, allowing for designs that would not have been possible with conventional manufacturing methods. The materials used in the production process are environmentally friendly and fully recyclable. It is precisely the unique combination of material and method that explains the great success of rotationally moulded plastic products.

The word ‘plastic’ is from the Greek word ‘plastikos’ meaning ‘to grow’ or ‘to form’.

Rotational or rotomoulding is an extremely popular and well-used process for producing items that are usually hollow. It’s most often used for very large articles which are usually made in small quantities. Items such as children’s toys, garden furniture, storage tanks are manufactured by rotational moulding.

Rotomoulding uses polymer in a powder form which is introduced into the mould along with any additives such as pigments or finishers. The mould is closed and then spun both vertically and horizontally and moved into an oven.

As the paste starts to melt and the mould continues rotating, it’s flung to the walls of the mould by centrifugal force where it forms a skin. After a fixed period, the mould is removed from the oven and allowed to cool carefully to avoid the product shrinking or warping.

 

Vacuum Forming is one of the oldest and most common methods of processing plastic materials. Vacuum formed products are all around us and play a major part in our daily lives.
The process involves heating a plastic sheet until soft and then draping it over a mould. A vacuum is applied sucking the sheet into the mould. The sheet is then ejected from the mould. In its advanced form, the vacuum forming process utilizes sophisticated pneumatic, hydraulic and heat controls thus enabling higher production speeds and more detailed vacuum formed applications.

Nature of Use and Limitations

Vacuum forming offers several processing advantages over other forming processes such as injection moulding. Low forming pressures are used thus enabling comparatively low cost tooling.

Since the process uses low pressures, the moulds can be made of inexpensive materials and mould fabrication time can be reasonably short. Prototype and low quantity requirements of large parts, as well as medium size runs therefore become economical.

Unlike other thermoplastic forming processes, where powder or resin are the starting point, vacuum forming uses extruded plastic sheet. With vacuum forming a secondary process may be required to trim the formed sheet to arrive at the finished part. The trimmed waste can then be re-ground and recycled.

What Kinds Of Molds Are Used?

Vacuum forming tools used for prototyping can be made from a variety of materials. The material choice will depend on the application and will vary in cost. At Jobec UK Ltd, we use wood or resin for prototyping as much as possible because it is the least expensive. However, wood does have some limitations and cannot be used in every application.

Production tools are typically made from machined or cast aluminum which are temperature controlled and last indefinitely. In terms of cost, an aluminum tool is much more expensive than a wood prototype tool and sometimes only slightly more expensive than an production resin tool. As a rule, the more detailed or large the part, the more expensive the tool.

In Terms Of Cost, How Does Vacuum Forming Compare To Other Processes?

 

Tooling Costs Part Costs
Fabrication very low high
Vacuum Forming Low low/med.
Rotational Mold Low medium
Injection Mold high very low

 

Why Choose Jobec UK Ltd?

Jobec has been involved in the manufacture of high quality vacuum formed and rotationally formed products for over 20 years. We have, between the staff, 40 years experience in the manufacture and supply of vacuum formed and roto formed products. Our broad knowledge base and expertise allows us to supply parts in all commercially available thermoplastics to your specifications. Jobec is also proud of our environmental conscience in the fact that, when performance parameters and customer requirements allow, we work with recycled and reprocessed materials whenever possible.

Acrylonitrile Butadiene Styrene ABS
Polyester Copolymer PETG
Polystyrene PS
Polycarbonate PC
Polypropylene PP
Polyethylene (sheet and foamed sheet) PE

Typical Products Produced

Baths & Shower Trays Pallets
Ski-Boxes Boat Hulls
Machinery Guards Vehicle Door Liners
Garden ponds Tote trays
Parts of vehicle cabs Exterior Shop Signs

 

Let Jobec UK help form the success of your business!

If you’d like to discuss a project in more detail with us or view some of our products in our portfolio that we have created you can contact us at jobecuk@hotmail.co.uk

Affiliate Websites:

Tanks On Demand

Rotational Moulding Website

Rotational Moulding: The Process

Rotational moulding is the process of creating hollow plastic parts/products, for example, water and fluid tanks, grit bins, road barriers, canoes, boats, floating pontoons, etc.

Screen Shot 2017-10-27 at 14.47.04.png

For more click information, please click here to visit our website.

The benefits of the rotational moulding process is a relatively uniform wall thickness throughout the product and secondly, the hollow moulding can have design and structural advantages difficult or impossible to achieve by other methods such as blow-moulding or vacuum forming.

 

 

 

 

 

 

Components for the Marine & Sanitation Industry

The two primary products that we wanted to share with you today are our one-way single valve manual hand pump, and our one-way manual foot pump, with service kits also available for both items to extend their life.

We believe that we have managed to create a quality product that our customers can use with confidence and reassurance. Both of our items have incredible application and are currently being used in a wide range of different sectors from construction to marine & boating uses.

You can find our products on our retail site, Tanks on Demand

If you want to speak to one of our representatives please don’t hesitate to call our office during work hours (8:30am-5:00pm Mon-Fri). We will be happy to answer any questions you may have about our products.

handpump1

Pictured: JOBEC Hand Pump

handpump2

Pictured below: JOBEC Foot Pump

footpump3

 

 

footpump1

Rotational Moulding: The Process


We can use a range of popular industry materials such as Standard Polyethylene, Cross-linked Polyethylene, Polypropylene, Polyvinyl Chloride, Nylon/Polyamides and Foamed Polymers.

We remove the plastic products from the moulds by releasing the clamps that separate the two tool pieces.

Next the product is taken out and is rigorously inspected for any imperfections, if it passes this quality assurance test it is trimmed and shaped while warm to allow an easier overall process & a smoother more refined finish to the final product.

This is time when Captive nuts, studs and other fittings can be fitted/extracted from the plastic products while they are still warm.

Depending on the size of the product being moulded we can decide which machine would be the most efficient to use. We have two different machines that both have particular pro’s and con’s depending on the type of work we have for them.

To find out more information about what we do please visit us at http://www.rotational-moulding.co.uk

To take a look at what products we manufacture visit us at http://www.tanksondemand.co.uk

Festival season is approaching..

18556099_10154372951536010_2467690969953153414_n.png

We have certainly been busy at Jobec this year and with Festival season approaching fast things are only going to get busier!

We are proud to announce that we are once again supporting Godiva Festival in Coventry, one of the biggest free UK festivals (last year they saw 148k+ people through the door!) as their dedicated supplier for hygiene and sanitation units over the course of the weekend.

The festival is on from the 7-9 July 2017 and features a wide range of acts from ‘The Stranglers’, ‘Example’ and ‘The Darkness’ and many, many more.

The location is at the War Memorial Park on Kenilworth Rd in Coventry, around a 15 minute walk from the town centre and a 10 minute walk from Coventry train station.
There is also 2000 car parking spaces available on the festival site with the entrance off Leamington Road

Find out more about Godiva festival by visiting their website here and if you’re interested then come along! We hope to see you there in July 🙂

More projects & faster turnarounds!

With our rotational moulding machine up and running we are able to take on more projects with a faster overall turnaround.

Almost any colour is achievable, including Fluorescent, Metallic, Sparkle, Granite, Antique, Cast iron and Pewter, Stone, Terracotta, etc. Using a suitable grade of polymer, properties can be achieved such as – Fuel safe, UV protection, Anti-bacterial, Foamed insulation and Flame retardancy.

Mouldings normally have an even wall thickness throughout, but by carefully manipulation during the moulding process, material can be added or reduced in certain areas for best effect. Captive nutsstuds and other fittings can be moulded in place during process if needed. We also offer post-mould assembly and packaging services for customer products and can dispatch direct to end users if required.

Many varied items can be manufactured quite easily by ourselves, items such as:

Water troughs, Cattle and sheep feeders, Spray tanks, Bulk fuel tanks, Bulk water tanks, Mudguards, Furniture, Baths & Spa’s, Bins & Planters, Point of sale displays, Road Barriers, Traffic Cones, Safety sign, Buoy’s, Life rings, Pontoon Floats, Kayak canoes, Horse, Jumps, Boats, Waste bins, Bottle Banks, Sinks, Portable toilets, Urinals, Doors & Framesand Roof boxes etc, The list of items that can be rotationally moulded is almost endless.

Get in touch with us today for a free quotation or simply to discuss any ideas that you may have. Call us on 01922 649 961 or e-mail us at jobecuk@hotmail.co.uk

Rotational Moulding

OLYMPUS DIGITAL CAMERA

A wide variety of surface finishes can be achieved either with the careful selection of polymer or in mould texture.

Almost any colour is achievable, including Fluorescent, Metallic, Sparkle, Granite, Antique, Cast iron and Pewter, Stone, Terracotta, etc.

Using a suitable grade of polymer, properties can be achieved such as – Fuel safe, UV protection, Anti-bacterial, Foamed insulation and Flame retardant.

Mouldings normally have an even wall thickness throughout, but by carefully manipulation during the moulding process, material can be added or reduced in certain areas for best effect.

Captive nuts, studs and other fittings can be moulded in place during process if needed.

We also offer post-mould assembly and packaging services for customer products and can dispatch direct to end users if required.

Many varied items can be manufactured quite easily by ourselves, items such as:

Water troughs, Cattle and sheep feeders, Spray tanks, Bulk fuel tanks, Bulk water tanks, Mudguards, Furniture, Baths & Spa’s, Bins & Planters, Point of sale displays, Road Barriers, Traffic Cones, Safety sign, Buoy’s, Life rings, Pontoon Floats, Kayak canoes, Horse, Jumps, Boats, Waste bins, Bottle Banks, Sinks, Portable toilets, Urinals, Doors & Frames and Roof boxes etc.

The list of items that can be rotationally moulded is almost endless – do you have any questions? Call one of our representatives on 01922 649 961, today or by clicking here to visit out website.

Four Way Sink Units

These portable sink units are always a big hit at events or parties. They are attractive in appearance and remarkably easy to use. The portable sink unit is operated by pressing a pedal at its base. This is highly sanitary because you do not need to touch anything with your hands. There are soap dispensers located by each sink basin.

handwash2_square

Central Toilet Hire also offer optional wall mounted water heater systems and integral water heaters within the sink units. We can supply warm hand wash systems in 12v, 110v and 220v.

To find out more about what we have to offer, please visit us at www.jobecuk.net/fourwaysinks or call us on 01922 649961 today!

warmhandwash

Rotational Moulding Manufacturing

We rotationally mould products ranging from our own sink & tank units to bespoke designs via the customers demands by up to 3 metres x 1.5 metres x 1.5 metres.
Using state of the art tools & moulds to manufacture with we can ensure that every mould that we produce holds the correct strength, general technicalities along with wall thicknesses & weight.

The moulds can be manufactured to customers specification in steel or aluminium. We can work with something as simple as a sketch with dimensions or full CAD files to create your products. We also undertake electrical and fabrication assembly to complete a wide range of product customisation for our customers.

Our dedicated staff are committed to a customer-led focus, with flexibility and determination to supply the right products, at the right place – at the right time.

Please visit us here for more information or call us today on +(0)44 1922 649961 to discuss any questions you may have.