Welfare Hire: Explained

Our Welfare Units are extremely popular and are often hired within the construction sector to enable workers to have an warm area with general facilities to eat and drink, alongside additional sanitation options. In order to comply with The Construction (Design and Management) Regulations 2015 (CDM 2015) work areas must see that certain rules are kept.

  • ‍Clean and working toilets
  • ‍Washbasins with hot and cold running water
  • ‍Sinks large enough to wash face, hands and forearms
  • Somewhere to change, dry and store clothing
  • A rest area to sit, make hot drinks and eat food

Our JOBEC Welfare Units are fitted with the following:

  • Large sink with hot water handwash/unit and clean drinking water
  • Recirculating toilet (30 gallons)
  • Recirculating flush toilet compartment
  • Built-in generator
  • Block insulation & heavy duty floor covering
  • Six way consumer unit
  • Microwave cooker & Kettle
  • Steel personnel doors with sliding steel shutter
  • LED interior lighting with electric wall mounted heater with double sockets

Here is our video below that showcases our JOBEC Welfare Units that we provide to many companies around the UK to ensure they are following correct procedure.

Call us on 01922 649 961 today for any questions you may have regarding the rental of our Welfare Cabins or you can speak to us via our contact form here.

Components for the Marine & Sanitation Industry

The two primary products that we wanted to share with you today are our one-way single valve manual hand pump, and our one-way manual foot pump, with service kits also available for both items to extend their life.

We believe that we have managed to create a quality product that our customers can use with confidence and reassurance. Both of our items have incredible application and are currently being used in a wide range of different sectors from construction to marine & boating uses.

You can find our products on our retail site, Tanks on Demand

If you want to speak to one of our representatives please don’t hesitate to call our office during work hours (8:30am-5:00pm Mon-Fri). We will be happy to answer any questions you may have about our products.


Pictured: JOBEC Hand Pump


Pictured below: JOBEC Foot Pump





Rotational Moulding: The Process

We can use a range of popular industry materials such as Standard Polyethylene, Cross-linked Polyethylene, Polypropylene, Polyvinyl Chloride, Nylon/Polyamides and Foamed Polymers.

We remove the plastic products from the moulds by releasing the clamps that separate the two tool pieces.

Next the product is taken out and is rigorously inspected for any imperfections, if it passes this quality assurance test it is trimmed and shaped while warm to allow an easier overall process & a smoother more refined finish to the final product.

This is time when Captive nuts, studs and other fittings can be fitted/extracted from the plastic products while they are still warm.

Depending on the size of the product being moulded we can decide which machine would be the most efficient to use. We have two different machines that both have particular pro’s and con’s depending on the type of work we have for them.

To find out more information about what we do please visit us at http://www.rotational-moulding.co.uk

To take a look at what products we manufacture visit us at http://www.tanksondemand.co.uk

Festival season is approaching..


We have certainly been busy at Jobec this year and with Festival season approaching fast things are only going to get busier!

We are proud to announce that we are once again supporting Godiva Festival in Coventry, one of the biggest free UK festivals (last year they saw 148k+ people through the door!) as their dedicated supplier for hygiene and sanitation units over the course of the weekend.

The festival is on from the 7-9 July 2017 and features a wide range of acts from ‘The Stranglers’, ‘Example’ and ‘The Darkness’ and many, many more.

The location is at the War Memorial Park on Kenilworth Rd in Coventry, around a 15 minute walk from the town centre and a 10 minute walk from Coventry train station.
There is also 2000 car parking spaces available on the festival site with the entrance off Leamington Road

Find out more about Godiva festival by visiting their website here and if you’re interested then come along! We hope to see you there in July 🙂

More projects & faster turnarounds!

With our rotational moulding machine up and running we are able to take on more projects with a faster overall turnaround.

Almost any colour is achievable, including Fluorescent, Metallic, Sparkle, Granite, Antique, Cast iron and Pewter, Stone, Terracotta, etc. Using a suitable grade of polymer, properties can be achieved such as – Fuel safe, UV protection, Anti-bacterial, Foamed insulation and Flame retardancy.

Mouldings normally have an even wall thickness throughout, but by carefully manipulation during the moulding process, material can be added or reduced in certain areas for best effect. Captive nutsstuds and other fittings can be moulded in place during process if needed. We also offer post-mould assembly and packaging services for customer products and can dispatch direct to end users if required.

Many varied items can be manufactured quite easily by ourselves, items such as:

Water troughs, Cattle and sheep feeders, Spray tanks, Bulk fuel tanks, Bulk water tanks, Mudguards, Furniture, Baths & Spa’s, Bins & Planters, Point of sale displays, Road Barriers, Traffic Cones, Safety sign, Buoy’s, Life rings, Pontoon Floats, Kayak canoes, Horse, Jumps, Boats, Waste bins, Bottle Banks, Sinks, Portable toilets, Urinals, Doors & Framesand Roof boxes etc, The list of items that can be rotationally moulded is almost endless.

Get in touch with us today for a free quotation or simply to discuss any ideas that you may have. Call us on 01922 649 961 or e-mail us at jobecuk@hotmail.co.uk

Four Way Sink Units

These portable sink units are always a big hit at events or parties. They are attractive in appearance and remarkably easy to use. The portable sink unit is operated by pressing a pedal at its base. This is highly sanitary because you do not need to touch anything with your hands. There are soap dispensers located by each sink basin.


Central Toilet Hire also offer optional wall mounted water heater systems and integral water heaters within the sink units. We can supply warm hand wash systems in 12v, 110v and 220v.

To find out more about what we have to offer, please visit us at www.jobecuk.net/fourwaysinks or call us on 01922 649961 today!


Rotational Moulding Manufacturing

We rotationally mould products ranging from our own sink & tank units to bespoke designs via the customers demands by up to 3 metres x 1.5 metres x 1.5 metres.
Using state of the art tools & moulds to manufacture with we can ensure that every mould that we produce holds the correct strength, general technicalities along with wall thicknesses & weight.

The moulds can be manufactured to customers specification in steel or aluminium. We can work with something as simple as a sketch with dimensions or full CAD files to create your products. We also undertake electrical and fabrication assembly to complete a wide range of product customisation for our customers.

Our dedicated staff are committed to a customer-led focus, with flexibility and determination to supply the right products, at the right place – at the right time.

Please visit us here for more information or call us today on +(0)44 1922 649961 to discuss any questions you may have.

Delivering to Events near you


Here at Central Toilet Hire we cater for a range of different events from weddings to festivals and other private functions.

Our Luxury Hire Unit offers the ultimate experience in contemporary design and function. Layouts include three ladies cubicles, one gents cubicle and a choice of two or three urinals.


  • In-built music system
  • LED mood lighting
  • Low wattage water heater and panel heaters
  • Modern contemporary style
  • Chemical flush
  • Weekly janitorial service
  • No plumbling or power required
  • Gel hand sanitizers

Welfare Hire Cabin


Welfare Cabin Unit – Available for Hire

The Welfare Unit provides all the following HSE requirements: Large sink for elbow to wrist washing in warm water. Recirculating flush toilet compartment with wash-hand basin. Storage Heater (drying room), eating/rest area and a facility to change clothing.
Our unit is equipped with a retractable axle and a unique built-in hydraulic system for safely raising and lowering the cabin to the ground. This fully HSE compliant unit can be installed and operational within three minutes of arrival on site. The Secure Mobile Welfare unit is of theft and vandal resistant all-steel construction with a double point locking mechanism securing its tow coupling and hydraulic system controls.



  • Large sink with hot water handwash/unit and clean drinking water
  • Recirculating toilet (30 gallons)
  • Recirculating flush toilet compartment
  • Built-in generator
  • Block insulation & heavy duty floor covering
  • Six way consumer unit
  • Microwave cooker & Kettle
  • Steel personnel doors with sliding steel shutter
  • LED interior lighting with electric wall mounted heater with double sockets


If you are interested in hiring out one of our welfare unit’s or are just interested in some more information please send us an enquiry via our web form at http://www.centraltoilethire.co.uk/enquire or phone us on 01922 649961